تاريخ الفيزياء
علماء الفيزياء
الفيزياء الكلاسيكية
الميكانيك
الديناميكا الحرارية
الكهربائية والمغناطيسية
الكهربائية
المغناطيسية
الكهرومغناطيسية
علم البصريات
تاريخ علم البصريات
الضوء
مواضيع عامة في علم البصريات
الصوت
الفيزياء الحديثة
النظرية النسبية
النظرية النسبية الخاصة
النظرية النسبية العامة
مواضيع عامة في النظرية النسبية
ميكانيكا الكم
الفيزياء الذرية
الفيزياء الجزيئية
الفيزياء النووية
مواضيع عامة في الفيزياء النووية
النشاط الاشعاعي
فيزياء الحالة الصلبة
الموصلات
أشباه الموصلات
العوازل
مواضيع عامة في الفيزياء الصلبة
فيزياء الجوامد
الليزر
أنواع الليزر
بعض تطبيقات الليزر
مواضيع عامة في الليزر
علم الفلك
تاريخ وعلماء علم الفلك
الثقوب السوداء
المجموعة الشمسية
الشمس
كوكب عطارد
كوكب الزهرة
كوكب الأرض
كوكب المريخ
كوكب المشتري
كوكب زحل
كوكب أورانوس
كوكب نبتون
كوكب بلوتو
القمر
كواكب ومواضيع اخرى
مواضيع عامة في علم الفلك
النجوم
البلازما
الألكترونيات
خواص المادة
الطاقة البديلة
الطاقة الشمسية
مواضيع عامة في الطاقة البديلة
المد والجزر
فيزياء الجسيمات
الفيزياء والعلوم الأخرى
الفيزياء الكيميائية
الفيزياء الرياضية
الفيزياء الحيوية
الفيزياء العامة
مواضيع عامة في الفيزياء
تجارب فيزيائية
مصطلحات وتعاريف فيزيائية
وحدات القياس الفيزيائية
طرائف الفيزياء
مواضيع اخرى
Tenacity
المؤلف:
GEORGE A. HOADLEY
المصدر:
Essentials of Physics
الجزء والصفحة:
p-22
2025-10-20
44
When a body resists forces that tend to pull it apart, the substance of which it is composed is said to be tenacious. Tenacity is a direct result of cohesion, a tenacious substance being one that has great cohesion. The tenacity of a substance is measured by the breaking weight per unit area of cross section.
The tenacity, or tensile strength, of steel is of great importance on account of the extensive use of this material in building operations. There are many grades of steel, but most of them have a tensile strength between 60,000 and 100,000 pounds per square inch.
Demonstration. - To determine the breaking weight of No. 24 copper wire, make a loop in one end and suspend it from a hook overhead. Fasten a pail to the other end so that it will be three or four inches above a table. Place known weights in the pail until the wire begins to stretch, then slowly pour in sand until the wire breaks.
FIG.1
By measuring the diameter of the wire and taking the weight of the total load, the tensile strength can be computed, by dividing the breaking weight by the area of cross section. (For example, if a wire in. in diameter is broken by a load of 104 lb., the tensile strength is
lb. per square inch.)
In bodies of the same material, tenacity varies with the form of the body. When the areas of cross section are equal, a tube has greater tenacity than a solid cylinder of the same material, and a wire with circular cross section has greater tenacity than one with a square cross section.
Tenacity diminishes with the length of time the load is carried, so that a wire may finally break with a load that it would carry safely at first. Tenacity also diminishes as the temperature increases, on account of the increased rate of molecular vibration.
الاكثر قراءة في مصطلحات وتعاريف فيزيائية
اخر الاخبار
اخبار العتبة العباسية المقدسة

الآخبار الصحية
