Isolation of Copper

The most important ores of copper contain copper sulfides (such as covellite, CuS), although copper oxides (such as tenorite, CuO) and copper hydroxycarbonates [such as malachite, Cu₂(OH)₂CO₃] are sometimes found. In the production of copper metal, the concentrated sulfide ore is roasted to remove part of the sulfur as sulfur dioxide. The remaining mixture, which consists of Cu₂S, FeS, FeO, and SiO₂, is mixed with limestone, which serves as a flux (a material that aids in the removal of impurities), and heated. Molten slag forms as the iron and silica are removed by Lewis acid-base reactions:

In these reactions, the silicon dioxide behaves as a Lewis acid, which accepts a pair of electrons from the Lewis base (the oxide ion).

Reduction of the Cu₂S that remains after smelting is accomplished by blowing air through the molten material. The air converts part of the Cu₂S into Cu₂O. As soon as copper(I) oxide is formed, it is reduced by the remaining copper(I) sulfide to metallic copper:

The copper obtained in this way is called blister copper because of its characteristic appearance, which is due to the air blisters it contains (Figure 1.1 ). This impure copper is cast into large plates, which are used as anodes in the electrolytic refining of the metal (which is described in the chapter on electrochemistry).

Figure 1.1 : Blister copper is obtained during the conversion of copper-containing ore into pure copper. (credit: “Tortie tude”/Wikimedia Commons)

مواضيع ذات صلة

كيمياء القصدير

تطبيقات الطبقات الثنائية الهيدروكسيد

تطبيقات عملية التبادل الأيوني

مواد التبادل الأيوني Ion exchanger

ظاهرة التبادل الايوني Ion Exchange

تاريخ التبادل الايوني Ion Exchange History

كيمياء البلاتين ومعقداته

كيمياء البلاديوم ومعقداته

طرائق تقدير النحاس

كيمياء النحاس ومعقداته

طرائق تقدير النيكل

كيمياء النيكل ومعقداته